CIW XCam Loader 1.5
(C)MASARE Team & Saoud007

Software 100% compatible with original programmer & CAMMY ICE Programmer.
Tested with UCAS programmer-N-Programmer (twin progger) with sucess.


-Restore original Bootloader For XCam Standard (Block 0) 
-Restore Bootloader For XCam Premium (Block 0)
 (this boot on Xcam Standard activate 2 new Chanels : Free XTV & XDreamTV use xcam_free.bin and it work)
-Loader include in memory not needed to load Xcrypto_App_Clear.bin
 just press button CLEAR (=cam in VIRGIN MODE).
-Auto detection of file's format (manualy selection always possible)
 When BIN file loaded Block 02 selected by default
 When Softcam.key loaded Block 14 selected by default 
-Check Firmware checksum
 if Bad checksum detected in file, all butons disabled to prevent cam damage
 GREEN Smiley if checksum is OK 
 RED   Smiley if checksum is WRONG
-Auto detect Port avalaible in machine
-Same procedure used as original loader algo modified & optimized


Change BootLoader
----------------
1/-Update Xcam with firmware (normal procedure)
2/-In CIW XCam Loader select Bootloader by pressing button
3/-Go to ci menu, select SERIAL Update, Press Activate loader
Now new bootloader is updated (for premium '-p' near firmware name after reboot cam)

Enjoy.

 





